Cooling Equipment
Cooling Equipment SKLN-Series Cooler is mainly used to cool the pellet with high temperature after Pelletizing.The moisture reducing ratio is not less 3.5%, After cooling the material temperature is not higher than the outside temperature 5℃ . Capacity (t/h): 1-8 Power (kw): 0.75-1.5 Cooling...
Cooling Equipment
SKLN-Series Cooler is mainly used to cool the pellet with high temperature after Pelletizing.The moisture reducing ratio is not less 3.5%, After cooling the material temperature is not higher than the outside temperature 5℃ .
Capacity (t/h): 1-8
Power (kw): 0.75-1.5
Cooling time: 6-10min or more
Model: SKLN11, SKLN15, SKLN20
Cooler Introduction
Scope:
SKLN-Series Cooler is mainly used to cool the pellet with high temperature after Pelletizing.The moisture reducing ratio is not less 3.5%, After cooling the material temperature is not higher than the outside temperature 5℃.
Cooler Advatages
1.Full Cooling, Prolong Material Storage Time
Advanced theory of counterflow cooling, widely applied in feed processing industry for cooling of all kinds of pellet materials.
Octagonal section cooling bin ensures no dead corner and is propitious to material cooling when output is below 6t/h.
2.Fence Discharge Agencies, Uniform Unloading
Fence discharge agency with reciprocating linear motion brings more smoothly and uniformly discharge .
Overall vertical layout, simple and beautiful.
3.Humanization Design, Long Service Life
The equipment has access door in the front, the side and top cover have viewing windows for easy observation and inspection.
Pressure reduced board at discharging, improve the work load, reduce distortion, extend the life of the part.
Gear motor drives eccentric shaft as transmission, smooth and reliable, low noise,easy to install and maintain.
Cooler Specifications
Model |
After cooling |
Power(kw) |
Capacity |
Size(mm) |
SKLN11 |
≤RT+3℃ |
0.75 |
3 |
1325×2516×1384 |
SKLN15 |
≤RT+3℃ |
1.5 |
7 |
1722×3196×2470 |