Hammer Mill
Hammer Mill is similar to a hammer crusher used in general industry.
The main purpose of the hammer crusher is to turn solid materials into small pieces under mechanical force.
When the rotor of the hammer mill rotates at a high speed, the hammer becomes radial (for the rotor of the suspended hammer) due to the centrifugal force.
Description
Hammer Mill is similar to a hammer crusher used in general industry. The main purpose of the hammer crusher is to turn solid materials into small pieces under mechanical force. When the rotor of the hammer mill rotates at a high speed, the hammer becomes radial (for the rotor of the suspended hammer) due to the centrifugal force. The rubber material enters the machine after being rolled by the feeding roller, and is immediately broken into particles by the impulse and tearing action of the hammer. The granule glue is discharged from the sieve hole in the bottom of the machine. Block, leaving the hammer to impact again until it passes through the mesh.
Technical Data
Model | Shaft speed | Power | Number of hammers | Screen hole | Motor series | Capacity |
r/min | kw | mm | t/h | |||
SFSP56x30 | 2930 | 18.5 | 18 | Φ3.0 | 2 | 3-4 |
SFSP56x40 | 2950 | 30 | 22 | Φ3.0 | 2 | 5-6 |
SFSP56x60 | 2970 | 55 | 34 | Φ3.0 | 2 | 5-8 |
SFSP56x80 | 2970 | 90 | 96 | Φ3.0 | 2 | 6-8 |
SFSP56x100 | 2980 | 132 | 120 | Φ3.0 | 2 | 8-11 |
Features
Hammer Mill uses a unique patented shaft entry air system - axial air intake that destroys the material circulation layer, effectively cleans the screen surface, processes small pore materials, and increases capacity.
It is equipped with a high-precision dynamic balance detection rotor and hammer to optimize the configuration, so that the micro-grinding performance reaches a new height, and the operation is smooth and the vibration is extremely small.
It has a unique design "U" type secondary crushing structure, which can effectively change the material trajectory, and the output is increased by 20% compared with other models.
It is equipped with a fully removable door operation and a linkage filter mechanism for easier operation and maintenance.
